Skip to main content

How to Use an -FB Model for NTN Connectivity

Dragino -FB models use the A1 revision of the Nordic nRF9151. These models can be adapted to support non-terrestrial network (NTN) connectivity.

1. Antenna Connection​

Inside the device, the nRF9151 RF output is routed to the RP-SMA connector through a 50 Ω RF trace and a 0 Ω resistor. Connect an NTN antenna directly to the RP-SMA connector.

2. Modem Firmware Upgrade​

For NTN connectivity, upgrade the nRF9151 modem firmware to mfw_nrf9151-ntn_1.0.1.

Upgrade instructions will be added after testing.