Skip to main content

What Port Should I Open in Router for Gateway IoT Connection

1. Ports used for UDP Packet Forwarder​

The gateway will use a port in the range of 1024-65535 to connect to the server's port 1700

UDP port: 1024-65535

2. Ports used for Basic Station Connection​

This depends on the transfer port of the server you are connected to.

Usually TCP port 443

3. Ports used for LoRaWAN MQTT Bridge Connection​

This depends on the transfer port of the server you are connected to.

Usually TCP port 1883/8883

4. Firewall to keep internet detection​

The gateway will send ping(ICMP) via 1.1.1.1/8.8.8.8/8.8.4.4/139.130.4.5 to detect if the internet is active.

The firewall allows ICMP data to pass through.

5. Time server synchronization​

By default, the gateway will fetch time information from a public time server to synchronize local time.

Use UDP port: 123

LPS8V2 use time server:

ntp.ubuntu.com
0.ubuntu.pool.ntp.org
1.ubuntu.pool.ntp.org
2.ubuntu.pool.ntp.org

DLOS8N/LPS8N/LG308N:

0.openwrt.pool.ntp.org
1.openwrt.pool.ntp.org
2.openwrt.pool.ntp.org
3.openwrt.pool.ntp.org

6. Auto-Update​

LPS8V2

repo.dragino.com

DLOS8N/LPS8N/LG308N:

www.dragino.com

repo.dragino.com

7. Dragino Management Platform​

The gateway will actively connect to the following servers

Usually TCP port 8883, HTTPS port 443

Server Address:

lns1.thingseye.io

thingseye.io